









|

|
Netscape Navigator Instructions
Here are some tips and tricks for setting up Netscape Navigator to use with
Opus One. Before you start, you will need to know two things. One is your
email address. This is always expressed with a fully qualified domain name.
For example, "rj@opus1.com" or "romeo.julieta@sovset.org."
The other is your mailbox name. This is just a single word, which may have
numbers in it. It may or may not match your email address. For example, your
mailbox name might be "rj" or "sovset123." You will also need to know your
password, of course.
-
Open Netscape and go to Edit->Preferences. The "Mail & Newsgroups" menu is
what you need. Click on the triangle to expand it if it's not expanded
already.
-
Click on Identity Enter your own name (such as "Romeo Julieta") in the
"Your name:" box, and your email address (such as "rj@opus1.com") in the "Email
address:" box. Everything else can be left blank (although you may want to
come back and fill things in after you've gotten it working).
-
Click on Mail Servers. We're going to work on the "Outgoing Mail Server"
part first. There are two possibilities. Either you are on an Opus One
connected network (i.e., you are in Tucson and you have a direct line to Opus
One, such as a DSL or T1 connection), or your are using some other ISP (cable
modem, AOL, Earthlink, etc.). If you are on an Opus One network, follow the
instructions in (4). If you are on some other ISP's network, follow the
instructions in (5). If you roam between networks, use (5).
-
For Outgoing Mail Server (connected to Opus One networks).
Enter "mail.opus1.com" in the "Outgoing mail
(SMTP) server:" box. Enter your mailbox name (such as rj or sovset123) in the
"Outgoing mail server user name:" box. For "Use Secure Socket Layer (SSL)...,"
select "Never." This will give you the best performance.
-
For Outgoing Mail Server (connected to other ISPs).
Enter "mail.opus1.com:2525" in the "Outgoing
mail (SMTP) server:" box. Don't forget the colon and 2525. Enter your mailbox
name (such as rj or sovset123) in the "Outgoing mail server user name:" box.
For "Use Secure Socket Layer (SSL)...," select "If Possible." This will give
you the best security.
-
Now, we're going to add an Incoming Mail Server. If you have one in the
list, click on it and delete it. Click "Add..." The server name should be
"mail.opus1.com" and the server type should be "POP." The user name should be
your Opus One mailbox name (such as rj or sovset123). If you want, select
"Remember password." Do not check "Check for mail every ..." minutes. On the
POP tab, it is very important that you do not check any boxes.
99.99% of our users are POP users. If you are an IMAP user (you would know
this) then the steps are the same except you should select "IMAP" as the server
type. The IMAP and Advanced tab defaults are fine, unless you are not on the
Opus One network, in which case you should check "Use secure connection (SSL)"
on the IMAP tab.
That's all you need to do. Netscape is fully set up to safely and securely
read mail from your mailbox on Opus One.
Home . Consulting . Library . Internet Services . About Us
© 2002 Opus One . Site by DesertNet Designs
|

|