login: admin
password:
juniper-isg-> ping 45.200.1.2
Type escape sequence to abort

Sending 5, 100-byte ICMP Echos to 45.200.1.2, timeout is 1 seconds
ip 45.200.1.2 is unreachable in vr trust-vr

Success Rate is 0 percent.
juniper-isg-> show config
              ^-------unknown keyword show
juniper-isg-> get config
Total Config size 5658:
set clock ntp
set clock timezone -7
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set vrouter name "ilabs" id 1025
set vrouter "ilabs"
unset auto-route-export
exit
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth-server "$infranet" id 1
set auth-server "$infranet" server-name "45.200.1.78"
set auth-server "$infranet" account-type xauth 802.1X
set auth-server "$infranet" radius secret "I0oXY4TfNuIq6qspzHCrmAS7Finva7nEGDAyBuCckdkgDtpNeIgU/5vZb16V7TEB1EKu1fsXpjhl"
set auth-server "$infranet" radius attribute calling-station-id
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "netscreen"
set admin password "nEQGIprLE9/PcidFCstLJfFtCYB2Tn"
set admin user "admin" password "nAIxN3rGAHRLcfOE8s3FTEBt99JIOn" privilege "all"
set admin auth timeout 10
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone id 1000 "Corp"
set zone "Corp" vrouter "ilabs"
set zone id 1001 "UnknownDev"
set zone id 1002 "guest"
set zone "guest" vrouter "ilabs"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "DMZ" tcp-rst
set zone "VLAN" block
unset zone "VLAN" tcp-rst
set zone "Corp" tcp-rst
set zone "UnknownDev" tcp-rst
set zone "guest" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet1/1" zone "guest"
set interface "ethernet1/2" zone "Corp"
unset interface vlan1 ip
set interface ethernet1/1 ip 45.200.17.1/24
set interface ethernet1/1 route
set interface ethernet1/2 ip 45.200.11.63/24
set interface ethernet1/2 route
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet1/1 ip manageable
set interface ethernet1/2 ip manageable
set interface ethernet1/1 manage ping
set interface ethernet1/1 manage web
set interface ethernet1/2 manage ping
set interface ethernet1/2 manage ssh
set interface ethernet1/2 manage telnet
set interface ethernet1/2 manage web
set auth-server "$infranet" src-interface "mgt"
set interface ethernet1/1 dhcp relay server-name "45.200.1.2"
set interface ethernet1/1 dhcp relay service
unset flow no-tcp-seq-check
set flow tcp-syn-check
set console page 0
set domain nac.ilabs.interop.net
set hostname juniper-isg
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set infranet controller name "juniper-uac"
set infranet controller name "juniper-uac" host-name 45.200.1.78 port 11122
set infranet controller name "juniper-uac" src-interface mgt
set infranet controller name "juniper-uac" password "6NHp6CJ1NF+PlLscA7CXuJc7Cen6Zogl/Q=="
set infranet controller name "juniper-uac" url "https://45.200.1.78"
set dns host dns1 45.200.1.2
set address "Corp" "IC" 45.200.1.78 255.255.255.255
set address "Corp" "infra.nac.ilabs.interop.net" 45.200.1.2 255.255.255.255 "DNS/DHCP Server"
set address "Corp" "InfraSun" 45.200.1.2 255.255.255.255
set ike p2-proposal "nopfs-esp-null-sha" no-pfs esp null sha-1 second 3600
set ike respond-bad-spi 1
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set icap av-vendor-id symantec-5
set url protocol websense
exit
set policy id 4 from "guest" to "Corp"  "Any" "infra.nac.ilabs.interop.net" "DHCP-Relay" permit
set policy id 4
set dst-address "InfraSun"
set service "DNS"
exit
set policy id 5 from "guest" to "Corp"  "Any" "IC" "ANY" permit log
set policy id 5 disable
set policy id 5
exit
set policy id 2 from "guest" to "Corp"  "Any" "Any" "ANY" permit log
set policy id 2
set idp
exit
set policy id 2
set log session-init
exit
set policy id 3 from "Corp" to "guest"  "Any" "Any" "ANY" permit log
set policy id 3
exit
set nsmgmt report alarm traffic enable
set nsmgmt report alarm attack enable
set nsmgmt report alarm other enable
set nsmgmt report alarm di enable
set nsmgmt report log config enable
set nsmgmt report log info enable
set nsmgmt report log self enable
set nsmgmt report log traffic enable
set nsmgmt init id F0699E6A073445301EC9D784A0B3FFBD415971FB00
set nsmgmt server primary 45.200.1.6 port 7800
set nsmgmt bulkcli reboot-timeout 60
set nsmgmt hb-interval 20
set nsmgmt hb-threshold 5
set nsmgmt enable
set ssh version v2
set ssh enable
set scp enable
set config lock timeout 5
set ntp server "45.200.1.2"
set ntp server backup1 "0.0.0.0"
set ntp server backup2 "0.0.0.0"
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "ilabs"
set route 0.0.0.0/0 interface ethernet1/2 gateway 45.200.11.1
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
set vrouter "ilabs"
exit
juniper-isg->